Dedicated to Provision of Long Term Stable Running IoT Devices
PRODUCT
real time gps vehicle tracker
Product Description:VT200-L is a 4G based GPS vehicle tracker. With built-in high-precision GPS positioning module reports the vehicle location and vehicle status to the vehicle tracking service platform through the 4G network for real-time vehicle monitoring, anti-theft, and dispatch management. It can be applied to fleet management, public transportation management, school bus management, taxi operation management, vehicle insurance company management, leasing management and private car anti-theft, etc.
VT200-L has a built-in 128Mb Flash memory. When the device enters blind area, it will automatically save historical positioning data. When the network recover, it will automatically resend historical positioning data to the service platform.
VT200-L contains an RS232 port, which can be connected to RFID to perform identity recognition and vehicle control for vehicle drivers; It can also be connected to OBD reader to read car ECU data and other RS232 peripherals to achieve corresponding functions.
Detail:
4G LTE
Support 4G/3G/2G network |
GPS/BDS/GLONASS/QZSS
Multiple positioning systems for high-precision real-time positioning |
|||||
IP66
IP66 Water-resistant ensures stable operation in tough environment |
9-100V
9-100V wide operating voltage applied to all types of vehicles |
|||||
128 Mb Flash
Store buffer when the signal is lost to keep a complete tracking route |
Two-way Audio
With MIC and loudspeaker for two-way communication |
|||||
Camera
Take photos and upload to server, support automatic photo upload triggered by events |
RS232
RS232 port can be equipped with a Camera, RFID, magnetic card reader or OBD II reader |
|||||
Dual Server IP
Support uploading location data to two servers simultaneously |
1-Wire
1-Wire® can be equipped with up to 8 temperature sensors or ibuttons |
|||||
Multiple I/O
3IN + 2OUT+1AD+1RS232+1-Wire+1Speaker+1Microphone, 4IN/2AD configurable |
Driving Behavior
Support harsh acceleration alarm, breaking alarm, harsh turning alarm, speeding alarm, drunk driving alarm, fatigue alarm, etc. |
|||||
FOTA
Quickly and easily upgrading firmware remotely |
Fuel Steal Alarm
Support ultrasonic fuel sensor or capacitive fuel sensor with fuel steal alarm |
Features:
Specification:
Specification:
General Features
Power Supply | 9V-100V |
Dimension | 99 x 54 x 19.5mm |
Weight | 106g |
Backup Battery | 500mAh |
Normal Power Consumption | 110mA/h |
Work Time | 33 hours in power saving mode and 4hours is normal mode |
Operation Temperature | -20° to 75° C |
Humidity | 5% to 95% Non-condensing |
Memory | 128M bit |
Waterproof Level | IP66 |
Sensor | 3D Acceleration Sensor |
Positioning | GPS +BD2 |
LTE /GSM Specifications
Frequency | VT200-L CN(Quectel EC200ACN CAT4)
LTE-FDD: B1/B3/B5/B8 LTE-TDD: B34/B38/B39/B40/B41 WCDMA:B1//B5/B8
VT200-L EU (Quectel EC200UEU CAT1) LTE-FDD: B1/B3/B5/B7/B8/B20/B28 LTE-TDD: B38/B40/B41 GSM: 850/900/1800/1900MHz
VT200-L AU (Quectel EC200AAU CAT4) LTE-FDD: B1/B2/B3/B4/B5/B7/B8/B28/B66 LTE-TDD: B40 WCDMA:B1/B2/B4/B5/B8 GSM: 850/900/1800/1900MHz |
4G LTE Module | EC200S(Cat-1)/EC200T(Cat-4),4G LTE,Quectel |
Data Transmission
|
LTE FDD: Max.10Mbps (DL)/Max.5Mbps (UL)
LTE TDD: Max.8.96Mbps (DL)/Max.3.1Mbps (UL) WCDMA: Max.384Kbps (DL)/Max.384Kbps (UL) GPRS: Max.107Kbps (DL)/Max.85Kbps (UL) |
GSM Data Transmission | Multi-slot class 12 |
GNSS Specifications
Sensitivity | Acquisition -149dBm
Tracking -167dBm Reacquisition -162dBm |
Position Accuracy | Autonomous: < 2.5m CEP |
Velocity Accuracy | Without Aid: <0.1m/s |
Channel | 33(Tracking)/ 99 (Acquisition) |
TTFF (Open Sky) | Cold Start: <26s
Warm Start: <15s Hot Start: <1s |
Reacquisition Time | <1s |
Interfaces
Digital Inputs | 2 positive trigger inputs(All 3 inputs can be configured as high and low trigger modes, AD1 can be configured as a high-level trigger input port), 1 negative trigger input |
Digital Outputs | 2 digital output, open drain, 500 mA max drive current |
Analog Inputs | 1 analog input (0V-36V), input3 can be configured as AD2(0-6.6V) |
1-Wire Interface | Support 1-wire temperature sensor/i-button |
Power Output | 5V outputs for external accessories |
Communication Ports | 1 RS232 ports for external accessories, such as RFID reader, magnetic card reader etc. |
Cellular Antenna | internal antenna |
GNSS Antenna | internal antenna |
LED Indicators | CEL, GNSS |
Microphone | External MIC |
Speaker | External Speaker |
Air Interface Protocol
Transmit Protocol | TCP, UDP, SMS |
Scheduled Report | Report position and status based on preset time intervals, distance, mileage or a combination of these settings |
Geo-fences | Geo-fence alarm and parking alarm |
Low Power Alarm | Alarm when backup battery is low |
Power On Report | Report when the device is powered on |
Driving Behavior Monitoring | Aggressive driving behavior detection, including acceleration, deceleration, speeding etc. |
Fuel Monitoring | Oil steal alarm, low oil alarm |
Temperature Monitoring | High temperature alarm, low temperature alarm |
Trailer Alarm | Alarm after the vehicle parking was towed away |
Idling alarm | Stop without flameout alarm |
Remote Control | OTA control of digital outputs |
FOTA | Support firmware upgrade over the air |
OBD II Reader | Read engine Rotating speed, water temperature, etc. |
Camera | Developing |
RS232 | RX green line, TX white line |
Protocol | iStartek new protocol |
Optional Accessories: