Do You Know iStartek VT600 Car GPS Tracking Device?

VT600 is a GSM based Car GPS Tracking Device, specially developed and designed for fleet management, public transport management, school bus management, taxi operation management, vehicle insurance company management, rental management and private car anti-theft, etc.
VT600 has an inbuilt GPS module to obtain accurate position data. This device utilizes its GSM capability to send position data or vehicle status to tracking server base for tracking and fleet management.
VT600 has built-in 4MB Flash memory. When the device enters a GSM blind area, it will automatically save the historical location data and resend once GSM signal recovery.

Car GPS Tracking Device Product Functions:
1. GPS+LBS Dual Positioning
2. Real-time Tracking
3. Track by Interval
4. Track by Distance
5. Track by Turning
6. Track by SMS
7. SOS Alarm
8. Power-cut Alarm
9. Engine and Door ON/OFF Status Alarm
10. Geo-fencing Alarm
11. Speeding Alarm
12. GPS Blind Area Alarm
13. Harsh Acceleration Alarm
14. Harsh deceleration Alarm
15. Low Battery Alarm
16. Low External Battery Alarm
17. Mileage Report
18. 4MB Flash Memory
19. OTA
20. ACC ON/Off Time Interval
21. Remote Control of Oil and Electricity
22. Listen-in
23. iButton for Driver Identity Recognition(Optional)
24. Buzzer Alarm(Optional)
25. Fuel Monitoring(Optional)
26. Temperature Monitoring(Optional)

Car GPS Tracking Device Install SIM Card
① The device supports 4G/3G Sim Card with a 2G service.
② Make sure that the SIM card has sufficient balance, and has opened GPRS function and obtained the correct APN of the SIM card.
③ Make sure that the PIN code is turned off.
④ If you require the function of reporting SMS location after makes a phone call, please ensure that the SIM card has caller display function.
⑤ Make sure the device is OFF before installing a SIM card.
A. Unscrew the front baffle screw and remove the PCBA

B. Install SIM Card
GSM antenna connector GPS antenna connector ON/OFF Button USB Port
C. Install PCBA and screw up the screw
7.3 Installation of GSM/GPS Antenna
① Twist the GSM antenna to “GSM” SMA Connector and GPS antenna to “GPS” SMA connector, make sure both antennas are tightened and not loosened.
② GSM antenna can be hidden in any place far away from the power supply, can not be pasted on the metal surface otherwise it will affect the strength of GSM signal.
③ GPS antenna have to be installed in open sky place without metal shielding.
7.4 Device Boot
Hold the ON/OFF button for 3-5 seconds or connect an external power supply, VT600 will turn ON.
LED indicator lights operation status:
GPS LED (Blue)
On Input is active
OFF Device is off or in sleep mode
Flashing ( every 0.1 second) The unit or GPS module is being initialized
Flashing (0.1 second on and 2.9 seconds off) VT600 has a GPS fix
Flashing (1 second on and 2 seconds off) VT600 has no GPS fix
GSM LED (Green)
On A call is coming in or in a call.
OFF Device is off or in sleep mode.
Flashing ( every 0.1 second) The unit or GSM module is being initialized.
Flashing (0.1 second on and 2.9 seconds off) VT600 is connected to the GSM network.
Flashing (1 second on and 2 seconds off) VT600 is not connected to the GSM network.

VT600 is a GPS/GPRS based Car GPS Tracking Device, specially developed and designed for vehicle real-time tracking and fleet management. VT600 has an inbuilt GPS module to obtain accurate position data. This device utilizes its GSM capability to send position data to a specified mobile phone or server base for tracking and fleet management. With internal memory, VT600 can store GPS coordinates when there is no GPRS connection, or at a specified interval requested by the user. One optional feature of VT600 is that a microphone can be linked and hidden somewhere inside the vehicle for listening to the cabin.