Dedicated to Provision of Long Term Stable Running IoT Devices
PT81 GPS Traker is a 4G intelligent waterproof locator with GPS+ Beidou +WIFI+LBS multi-mode precise positioning, real-time positioning, SOS call, voice monitoring, health meter and low power consumption. It can be applied to the elderly location mobile phone, student location card.
Product Function Descriptions
Turn on/off:
Turn on:Long press the power button for 5 seconds to turn on;
Turn off:
① Without SIM card, long press the power button to automatically shut down;
② With SIM card: Go to APP More – Settings – Remote shutdown;
Buttons:
Power button: Long press the power button for 5 seconds to turn on;Short press to turn off the screen, brighten the screen, hang up, return to the interface, etc.
SOS button for help: After setting SOS number successfully in APP, long press SOS button for 3 seconds to make SOS call; After receiving the voice, press to return to the interface.
Voice button: press 2 times to tell the time; Short press to listen when receiving a voice; When you receive an incoming call, press to answer the call.
Working Modes:
Fast tracking: 1 minute (3 minutes)/time upload location data;
Standard Tracking: 10 minutes/time uploading location data;
Power saving tracking: 1 hour/time upload location data;
Disable tracking: Manually click the location icon to update the location data.
Electronic fence:
The radius of the electronic fence can be set at 200-2000 meters. When the device exceeds the fence, the alarm information can be received on the APP, but there is no alarm information about entering the fence.
Micro chat:
The device sends voice: press the voice button for 3 seconds before recording (do not release it), release it and send the voice to the mobile APP. (The amount of time an APP receives a voice depends on the network.)
APP to send voice: After entering the APP micro chat, press and hold to speak and release the hand to send voice to the device. The longest recording time is 15 seconds. The device will be prompted when receiving a voice. Press the voice button to play the voice.
Other functions:
The historical track, electronic fence, step counting, stranger call rejection, Do not disturb mode, scene mode, health reminder, SMS reminder and other functions can be operated according to the APP prompts.
Mini GPS Traker Install and use
①.Preparation before use
A、Please buy a Nano-SIM phone card, please power off the phone before installing the card.
B、The phone card must be enabled with the caller ID /4G Internet access/call function.
C、You can install a data card if you only need the positioning function without calling.
②.Purchase and installation of SIM card
Step 1: Buy a Nano-SIM phone card. Please enable the caller ID, 4G data flow Internet access function, HD call function.
Step 2: Install the phone card
Please shut down before loading the card, as shown in the picture above. Place the metal side of the card chip up, align the notch with the upper left corner of the notch of the card into the card, and then install the device.
Note: Please do not remove the phone card directly in the boot state to prevent the card from being burned out. Using a clipper card may cause improper insertion or removal and damage to the card slot.
③.Power on after inserting the card
④.Mobile APP download and login
Step 1: Download the APP
1、Search “AIBEILE” in the mobile APP store to download, or scan the QR code to download the app
Step 2: Log in to the APP
1、After the card is installed, observe whether there is a display in the status bar of the device: signal grid, 4G, networking arrow, HD (there is no word HD in the card of things), if there are all, you can log in the APP to operate the device function.
To start the mobile app, select “Device Login” in the lower left corner and enter your ID and password to log in.
2、After the device is successfully added, you can save the mobile phone number to be contacted in advance (the short number must also be saved for those who have opened the short number) and SOS number in the APP Settings. Other functions can be operated on the APP.
Note: Manage the device through APP, all the operations on the device need to be pushed to the device through the network, via the network situation, sometimes there will be a delay, please don’t worry!
⑤.Charging device
* Please use 5V1A charging with CCC certification mark, 5V⎓1A MAX, do not use fast chargers with output voltage higher than 5V and output current higher than 2A, use will cause equipment damage!
* Before charging, please dry the sweat at the charging thimble to prevent the salt in the sweat from electrolyzing the gold plating layer, resulting in failure to charge.
* It is recommended that the charging time not exceed 4 hours.
Please use the standard charging cable of the charger to charge the Mini GPS Traker device, and ensure that the charging cable is aligned with the charging interface until the charging icon or “charging..” appears on the device screen. “, start charging (if the charging interface is dirty, please clean it first and keep the charging place dry).